Sublimation Transfer Parameters in Celsius
Ceramic Tile
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 6 Minutes
Flat Bed Heat Press
- 180 Celsius
- 200-240 Seconds
Granite Rock
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 8 Minutes
Flat Bed Heat Press
- 180 Celsius
- 200-240 Seconds
Glass
Straight Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 6 Minutes
Flat Bed Heat Press
- 180 Celsius
- 150-180 Seconds
Crystal
Straight Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 10-13 Minutes
Flat Bed Heat Press
- 180 Celsius
- 200-300 Seconds
Metal
Mirror Printing with High Pressure
3D Heat Press
- 180 Celsius
- 3.5-4 Minutes
Flat Bed Heat Press
- 180 Celsius
- 60 Seconds
Wood MDF
Mirror Printing with High Pressure
3D Heat Press
- 180 Celsius
- 4-5 Minutes
Flat Bed Heat Press
- 160 Celsius
- 150 Seconds
Crystal Plaque
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 4-5 Minutes
Flat Bed Heat Press
- 160 Celsius
- 200-300 Seconds
Crystal GHP
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 7 Minutes
Flat Bed Heat Press
- Not Applicable
- Not Applicable
T Shirt
Cotton
Light Garment
Mirror Printing with High Pressure
3D Heat Press
- Not Applicable
- Not Applicable
Flat Bed Heat Press
- 180 Celsius
- 30 Seconds
T Shirt
Cotton / Polyester
Dark Garment / Vinyl / DTF
Mirror or Straight Printing with High Pressure
3D Heat Press
- Not Applicable
- Not Applicable
Flat Bed Heat Press
- 160 Celsius
- 25 Seconds
Ceramic Plate
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 4-5 Minutes
Flat Bed Heat Press
- Not Applicable
- Not Applicable
Ceramic Mug
Mirror Printing with Moderate Pressure
3D Heat Press
- 180 Celsius
- 8 Minutes
Mug Heat Press
- 180 Celsius
- 3 Minutes
01. Above time & temperature parameters are just for equipment made by our factory. It may be different from that of others.
02. The Temperarture is “Celsius”.
03. Above parameters are only our suggestions from our own experience. You can try out tjhe best from your own opration.
Notice:
01. Do not heat the machine without mug in the heaters in case of burnout; Do not touch the
heating elements directly without any protection in case of any hurt; If the machine works more
than 1.5 hours, it is better to close the machine for 20 minutes break.
Please contact your substrate supplier for additional information.
HEAT PRESS MACHINE - SIMPLE POWER CONNECTION
Main Power Board
16A MCB
13A Wall Socket
Heat Press Machine
WIRE THICKNESS GUIDE (COPPER WIRE)
| CONNECTION | WIRE SIZE | REMARKS |
| Main Bord to MCB | 2.5mm | For Safe & Reliable Power |
| MCB to Wall Socket | 2.5mm | Recommended |
| Wall Socket to machine | 2.5mm (Flexible) | Use Good Quality 3 Core Cable |
| Earth (E) | 2.5mm | Mandatory for Safety |
KEY POINTS
- Always use 16A MCB for protection against overload & short circuit
- Use 13A wall socket for safe and stable connection
- Proper earthing is mandatory for user safety
- Use recommended wire size (2.5 mm copper wire)
SAFETY FIRST
- Switch OFF the power before any connection or maintenance.
- Ensure all connections are tight and insulated properly.
- SAFE connection. perfect prints!
IMPORTANT SAFETY NOTICE
All electrical wiring and installations must be carried out by a qualified professional electrician. Always use high-quality copper wires, certified sockets, and reliable electrical components. Do not use low-quality wire cords or cheap accessories, as they may cause overheating, short circuits, fire hazards, or machine damage. Proper grounding (earthing) and correct wire thickness are mandatory for safe and stable operation of the heat press machine.
Print Right
No.382, Galle Road, Colombo -06. | Tel: 011 4 38 6668 | Hotline : 0777 628 679